Dewatering Pumps
Single-Phase Submersible Pumps
HS Series
Submersible pump designed for water, wastewater, and light slurry pumping. Residential, commercial, industrial & construction dewatering applications.
LSC Series
Low-level residue pump capable of pumping water continuously at 1/16 of an inch.
LSR Series
Low-level, high-volume residue pump capable of pumping down to 1/4 of an inch.
Water Feature Series
A wide range of pumps for streams, waterfalls, fountains, and any type of commercial water feature.
Three-Phase Submersible Pumps
AB Series
High-volume, low-head, axial-flow, submersible drainage pump ideal for water features or fish hatcheries.
GPN Series
Agitator series submersible pump designed for slurry, mud, and sand pumping with hard-iron adjustable wear parts and bottom-side discharge up to 6-inches.
GSD Series
Heavy-duty agitator series submersible pump designed for high-volume and high-head slurry pumping applications.
GSZ Series
High-volume submersible drainage pump with built in cooling jacket to prevent over heating.
KTZ / KTZE Series
Construction pumps capable of converting from high-head to high-volume in 2HP – 15HP designs.
KTV / KTVE Series
Light-weight construction for ease of portability, available in 1HP – 7.5HP designs.
LH Series
High-head pumps providing medium to high flows. Ideal for generating plants and mining operations.
LHW Series
Rental and supply companies preferred choice for contractor-ready slimline products.
Engine Driven Pumps
EPT3-50HA
Constructed for maximum durability, our engine driven dewatering pumps are compact and lightweight, built with the contractor in mind. 2″ discharge trash pump with Honda GX engine.
EPT3-80HA
Constructed for maximum durability, our engine driven dewatering pumps are compact and lightweight, built with the contractor in mind. 3″ discharge trash pump with Honda GX engine.
Hose Kit
The hose kit is available in 2″ and 3″ diameters to support the EPT3-50HA and EPT3-80HA respectively. Includes: 30′ inlet hose, inlet strainer, 50′ discharge hose with quick disconnect fittings, and 2 each quick disconnect adapters.
Accessories
50′ Discharge Hose
The discharge hose is available in 2″ and 3″ diameters with a male quick disconnect fitting on one end and a female quick disconnect fitting on the other end. Fittings are constructed of aluminum. Multiple hoses can be joined together for longer runs.
QD Adapter
The quick disconnect adapter is available in 2″ and 3″ diameters to fit the 50′ discharge hose. The inside is female NPT to match any pump with a male NPT discharge. Aluminum construction.
2″ Angled Coupling
This is the default coupling used on the LB-480, LB-480A, LB-800, LB-800A, LBT-800, and LSR2.4S. The 2″ angled coupling can also be used on the LSC1.4S. The 2″ angled coupling can be positioned vertically or at an angle as needed. Cast iron construction with a 2″ male NPT discharge.
2″ Straight Coupling
This coupling fits the HS2.4S, HSZ2.4S, HSE2.4S, HSD2.55S, 50SQ2.4S, 50Q2.75S, 50UT2.4S, 50UTZ2.4S, 50UT2.75S, and 50UTZ2.75S. 2″ male NPT discharge. Cast iron construction.
Surface Level Switch
The Surface Level Switch (SLS-LSC) is a piggyback switch that works in combination with the LSC1.4S residue pump. When the used together, the SLS-LSC turns the LSC1.4S pump on when the water level reaches 3/8 of an inch, and turns the pump off when the water level drops below 1/8 of an inch.
Residue Kit
The Residue Kit works with the HS2.4S and HSZ2.4S trash pumps. Replace the default intake screen with the Residue Kit and your pump will pump down to 1/2 of an inch.
Oil Smart Sump Pump Controller
The Oil Smart® OSS-100 System, when combined with a manual sump pump, will automatically pump water without the risk of pumping oil into the environment. Additionally, the system alerts maintenance or building personnel in the event of a high oil or high water condition.
Oil Smart Switch
The Oil Smart® Pump Switch, when combined with a non-auto sump pump, will allow water to be pumped without the risk of pumping oil.